ReadMe.txt for the ST STM32H743 start project.

This project was built for SEGGER Embedded Studio V5.20a.

Supported hardware:
===================
The sample project for the STM32H743 is prepared to run on
an ST STM32H743ZI Nucleo board. Using different target hardware
may require modifications.

Configurations:
===============
- Debug:
  This configuration is prepared for download into internal
  Flash using J-Link. An embOS debug and profiling library
  is used.
  To use SEGGER SystemView with this configuration, configure
  SystemViewer for STM32H743ZI as target device and SWD at
  2000 kHz as target interface.

- Release:
  This configuration is prepared for download into internal
  Flash using J-Link. An embOS release library is used.

Note:
=====
This project uses an embOS library without the workaround for
the ARM erratum 837070. If you have a device with the ARM core
revision r0p0 or r0p1 please use the according embOS library
with the workaround.
Please have a look in the core/compiler specific embOS manual
for more details.