SemiDrive E3650

From SEGGER Knowledge Base
Jump to navigation Jump to search

The SemiDrive E3650 is a high-performance, lockstep multi-core device featuring four ARM Cortex-R52+ cores.

Supported devices

Refer to the supported device list for a full list of all supported E3650 family devices, their corresponding names and connection diagrams.

Target interfaces

Interface J-Link support Flasher support
SWD
JTAG

Flash banks

Flash bank Base address J-Link support Flasher support Loader
Name Bank size
MRAM1 0x01000000 Default 4MB
MRAM2 0x01400000 Default 4MB
MRAM3 0x01800000 Default 4MB
MRAM4 0x01C00000 Default 4MB


Watchdog handling

  • The device features a watchdog (WDTn).
  • If the watchdog is enabled, it is disabled during flash programming and re-enabled afterwards.

Device specific handling

Connect

  • Debugging is enabled.
  • The core is released from reset if necessary.

Reset

  • A core reset is generated via the RSTGEN module.
  • The core is halted after reset using vector catch.

Attach

Attach is a debugging feature which exclusively applies to J-Link and J-Trace and does not apply to Flasher.

  • Attach is supported / desired

Multi-core support

Before proceeding with this article, please refer to the generic article regarding multi-core debugging here.

Core J-Link support
Cortex-R52 0
Cortex-R52 1
Cortex-R52 2
Cortex-R52 3

Below, the debug-related multi-core behavior of the J-Link is described for each core:

Cortex-R52

Init/Setup

  • Enables debugging of the respective core, see Connect

Reset

  • Device specific reset is performed, see Reset

Evaluation boards

Example application